Bently Nevada 9200-01-01-10-00 Seismoprobe Velocity Transducers Description: 9200-01-01-10-00 is a two-wire transducer suitable for continuous monitoring or for periodic measurements in conjunction with test or diagnostic instruments. When ordered with the integral cable option, the 9200 has excellent resistance to corrosive environments without need of additional protection. Bently Nevada Seismoprobe Velocity Transducer Systems are designed to measure absolute (relative to free space) bearing housing, casing, or structural vibration.  Ordering Information: Two-wire Transducer 9200-AA-BB-CC-DD A:  Transducer Mounting Angle/Minimum Operating Frequency Option 01  0 ±2.5, 4.5 Hz (270 cpm)   02  45 ±2.5, 4.5 Hz (270 cpm)  03  90 ±2.5, 4.5 Hz (270 cpm)                       06  0 ±100, 10 Hz (600 cpm)                       09  0 ±180, 15 Hz (900 cpm)  B: Connector/Cable Option 01  Top Mount (no cable) 02  Side Mount (no cable)  05  Terminal block top mount (no cable) 10 through 50 10  10 feet (3.0 meter) 15  15 feet (4.6 meter) 22  22 feet (6.7 meter)  32  32 feet (9.8 meter)  50  50 feet (15.2 meter) C: Mounting Base Option 01 Circular; 1/4-20 UNC stud                      02 Circular; 1/4-28 UNF stud  03 Rectangular flange                      04 Circular; with three 8-32 threaded studs on a 44 mm (1.75 in) diameter bolt circle  05 No base; 1/2-20 UNF-3A stud  06 Isolated circular 1/4-20 UNC stud  07 Isolated circular 1/4-28 UNF stud                      08 Isolated rectangular flange  09 Isolated circular 5/8-18 UNF stud  10 Circular; M10X1 stud  11 Isolated circular M10X1  12 Isolated circular 1/2-20 UNF-2A D: Agency Approval Option  00 No Approvals  01 CSA  04 ATEX/IECEx Related items: 9200-06-05-10-00 9200-01-05-10-00 9200-06-02-10-00