GENERAL ELECTRIC DS200SLCCG3AEG GE Mark V LAN control module

The PMS-300 Process Monitoring System is a modular 19'' rack-based system designed for the protection & monitoring of rotating machines. In its 3HU version, 1 slot is available for the reference module card PMS-340, 8 slots for the 4-channel processing module cards PMS-314 & relays controller PMS-330/PMS-331. The system is also available in 6HU if additional channels and/or redundant power supply are required. BNC terminals are available on the front for external analysis. The reference signal card PMS-340 acquires and distributes common information to/from all PMS-314 on the rack. Such information is typically: reference signals (2 channels), modeOTP selection and digital monitoring parameters via modbus. For each channel, the Processing Modules System PMS-314 provides analogue (4..20mA) and digital output (alarm, danger, sensor ok, system ok) based on calculated parameters and alarm settings.  Ethernet interface is also available for configuration and communication to realtime and CMS-500 software packages. The relay controllers PMS-330/PMS-331 allow relays configuration by logical combination and transferral of operating parameters to CMS-500 (via analogue inputs or modbus interface). 

HERE IS THE STOCKS

TDC3000 UM MODEM 51304163-300 WITH BOARD 51190913-
TDC3000 UM CONTROL 51303982-900 WITH DB CONTROL BO
TDC3000 PWA I/O WREN II 51108676-100 51108676100
TDC3000 POWER SUPPLY 51107595100
TDC3000 J-KE001 CABLE
TDC3000 IBI CARD 82407390-001, IBI A/D CARD 824082
TDC3000 DELL M570 MONITOR
TDC3000 ANALOG OUTPUT PROCESSOR MODULE
TDC3000 82408667-003 ROM/RAM 505 MEMORY CARD
TDC3000 82408667-001 ROM/RAM 535 MEMORY CARD
TDC3000 82408609-105 CABLE
TDC3000 82408522 BACKUP MEMORY BACKPLANE
TDC3000 82408517 RBCD IO BUS SWITCH BACKPLANE
TDC3000 82408485-001 SBLA-III 82408485001
TDC3000 82408467-001 IOB SW CARD
TDC3000 82408467 IOB SWITCH COUNT
TDC3000 82408464-001 SWITCH CONTROL CARD 824084640